Standard equipment configuration
Self-adhesive label parameters
Roll label in the labeling machine work the entire process, including label delivery, positioning, out of the label, paste and backing paper re-roll, to successfully complete the labeling process, the overall label has the following requirements:
Label spacing: 3-4mm ± 0.2mm, the upper and lower edge of the label and the bottom of the backing paper spacing: 2mm
Surface material: basic grammage 78 g/m2 plus or minus 10%，Thickness: 0.064mm plus or minus 10%
Backing paper: Basic weight 61g/m2 plus or minus 10% Thickness: 0.055mm plus or minus 10%
Consistent release force, uniform thickness, a certain tensile strength, translucent Grassian base paper is generally between 60-80 g, fiber density tightness flatness to be good, not easy to break when labeling, the overall translucency to be consistent, the sensor correctly identify the location of the label.
Tensile force: machine direction: 16kg/25mm Horizontal direction: 7kg/25mm
Tear resistance: machine direction: 25g / sheet Crosswise: 31g/sheet
Before labeling to eliminate the static electricity in the roll label, so that the label is firm out of the label, from the backing paper, because static electricity will cause labeling when not out of the label or the labeling inaccuracy phenomenon, die-cutting to avoid cutting through the backing paper and not out of the label and torn backing paper phenomenon.
1. One-year machine warranty, lifetime maintenance service.
2. Experienced engineers provide fast and professional 24 hours online guidance.
3. Provide complete teaching videos and instruction manual, easy to operate and maintain. The video of the operation is stored on a USB shipped with the machine