How much do you know about the duckbill mask machine?

The duckbill mask machine, also known as the automatic ultrasonic duckbill mask-making machine, is a machine that uses the principle of seamless ultrasonic fusion to produce duckbill masks for highly polluting industries.

Here is the content:

l Introduction of duckbill-shaped mask machine

l Maintenance precautions for duckbill mask machines

Introduction of duckbill-shaped mouthpiece machine

The mask body part of the duckbill mask making machine can use 4~10 layers of PP non-woven fabric and filter materials (such as melt-blown fabric, activated carbon material, etc.), so that it can produce finished masks of various filter levels such as N95, FFP2, etc. The duckbill mask machine has a high degree of automation, from feeding to finished product is a line of automatic operation: automatic feeding of raw materials, independent nose line conveying system, automatic folding of the nose line in the non-woven fabric, automatic folding and cutting of the finished product, and automatic attachment of breathing valve holes. The finished products produced by this duckbill-shaped mask-making equipment are beautiful; stable in performance, high in output, low in defective rate, and easy to operate.

Maintenance precautions for duckbill mask machines

As we all know, the most prone to failure of the mask-making machine is the electronic part, and the core of the electronic part is the ultrasonic system. The maintenance of the ultrasonic system of the mask machine is as follows for your reference.

1. Open the power switch of the mask machine, the ultrasonic power indicator light of the mask machine does not light up, there is no action. Reason: poor contact between the power cord of the mask machine and the power socket; the power fuse of the mask machine is blown.

2. Open the power switch of the mask machine, the power indicator light is on, but there is no action, and there is ultrasonic output by the ultrasonic test button of the mask machine. Reason: The five-core wire connected to the base of the mask machine and the rack is open; the machine program circuit board is faulty.

3. Open the power switch of the mask-making equipment, the power indicator of the mask machine is on, but there is no action, and there is no ultrasonic output by the ultrasonic test button of the mask machine. Reason: Check whether the emergency stop switch of the mask machine is pressed; the 110V or 24V power supply of the ultrasonic power transformer of the mask machine is not normal; the machine program circuit board is faulty.

4. The mask machine has action, but there is no ultrasonic output when the ultrasonic test button and work button of the mask machine is pressed. Cause: The 110V power supply of the ultrasonic power transformer of the mask machine is not normal; the 110V power cable of the ultrasonic circuit main board of the mask machine is off.

5. Press the test button mask machine can work normally but press the mask machine work button machine but no action. Reason: The work switch of the mask machine is damaged; the five-core wire connected to the base of the mask machine and the rack is open.

6. When pressing the ultrasonic test button of the mask machine, the power load table indicates a value greater than 20% and cannot be turned down through the tuner. Cause: masks machine ultrasonic transducer system failure; machine power tube burned.

7. Mask machine ultrasonic overload indicator light when welding. Reason: masks machine ultrasonic transducer system failure.

8. The welding effect of the mask welding parts is not satisfactory, but the overload indicator light does not light up when welding, and the ultrasonic wave output of the mask machine is weak. Reason: The 24 V power supply of the ultrasonic power transformer of the mask machine is not normal, the relay does not operate; the three-terminal voltage regulator LM7824 on the ultrasonic program board of the mask machine is damaged.

9. The welding effect of the welding parts is not satisfactory, and the whistling sound is heard by the ultrasonic test button of the mask machine. Reason: Mask machine ultrasonic transducer system assembly problems.

10. Open the power switch of the mask-making machine to hear a faint whistling sound. Reason: Mask machine ultrasonic circuit board on the power tube burned 1 ~ 2.

For companies to serve users attentively, to do a good job of quality, and to have a safe and affordable price, can they win the reputation of loyal users and be recognized by everyone. For consumers, the most important thing for consumers is that what we spend is worth using. Gosunm Intelligent Industry Co., Ltd. has conducted a lot of tests on the mask machines before leaving the factory. If you need the mask machine business, you can consider using our cost-effective products.