Home / News Center / What is needed to pay attention to in the use of ultrasonic What is needed to pay attention to in the use of ultrasonic mask machines?

What is needed to pay attention to in the use of ultrasonic What is needed to pay attention to in the use of ultrasonic mask machines?

Views: 241     Author: Site Editor     Publish Time: 2022-06-28      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

It is very important to maintain and overhaul the ultrasonic mask machine. The maintenance of a ultrasonic mask machine can bring better work, safer and more efficient for the mask machine, so what should be done when maintaining the ultrasonic mask machine?

Here is the content:

l Requirements related to ultrasonic mask machine

l Introduction to the maintenance method of ultrasonic mask machine

Requirements related to ultrasonic mask machine

1. The strength and stiffness of each part of the ultrasonic mask machine should meet the safety requirements and be firmly installed to avoid frequent failures.

2. The layout and management of ultrasonic equipment should be reasonable, so that the operator is also easy to load and unload workpieces, observe the process and remove debris, etc. It is also easy to maintain.

3. According to the relevant safety requirements, ultrasonic machinery and equipment must be equipped with safety equipment that does not affect the operation or reliability.

Introduction to the maintenance method of ultrasonic mask machine

A flat mask machine can be maintained by the following aspects, in the maintenance process must be turned off the power supply:

1. Ultrasonic system: check whether the ultrasonic mask making machine system is kept clean, especially the ultrasonic electric box, vibrator (transducer), welding head must be dry, clean, no water, the connection line must be solid to check the wear and tear of the ultrasonic welding head observe the degree of change of the voltmeter and ammeter pointer on the ultrasonic electric box.

2. Pneumatic system: mask machine's air filter cup needs to be checked for water discharge, also needs to discharge water into the air compressor. In high humidity areas, the air compressor should be discharged daily to check all air tube cylinders for leakage, cylinder magnetic sensor direction, and normal operation.

3. Appearance: The masks are usually worn on the face, and medical masks need to go in and out of the operating room with the medical staff. Therefore, the production of masks must require the cleanliness of the mask machine equipment. At the end of each day, it is necessary to arrange for personnel to shut down the mask-making equipment after the power is turned off and clean the work surface and the tray containing the masks. Please note that it should not be cleaned with water and the equipment should be cleaned with a non-toxic, volatile cleaning solution.

4. Electrical system: Check whether the connectors of the mask making equipment circuit are loose, whether the main power lines, branch signal lines, etc. are worn and aged, whether the electrical equipment is loose, whether the electrical box is kept in a dry environment and whether the exhaust fan is working properly in a dry state, etc.

5. Transmission system: The transmission system includes the motor, gear, reducer, sprocket, chain, conveyor belt, and other components. We need to check whether there is dust and other debris attached to the motor that affects heat dissipation and whether the gears and sprockets are oiled. If there are attachments, they should be cleaned up, whether the chain is suitable in terms of elasticity, whether foreign objects are cleaned up, whether the connecting screws between transmission parts are loose, and whether the lubricant of the reducer is enough, which usually needs to be replaced once in 1000-1500 hours.

6. Anti-rust: It is prohibited to stick the equipment on corrosive liquids and objects. Sweat can easily cause rusting of equipment parts. If the mask-making equipment does not work for a long time, it is necessary to apply anti-rust oil on the mask and the transmission system of rust-prone parts.


For companies to serve users attentively, to do a good job of quality, and to have a safe and affordable price, can they win the reputation of loyal users and be recognized by everyone. For consumers, the most important thing for consumers is that what we spend is worth using. Gosunm Intelligent Industry Co., Ltd. has conducted a lot of tests on the mask machines before leaving the factory. If you need the mask machine business, you can consider using our cost-effective products.


Contact Us
As Excellent As Gosunm Intelligent. The main products are labeling machine, dws equipment, filling machine, packing machine, mask machine, sealing machine.

Quick Links

 Privacy settings
Consent to Cookies & Data processing
On this website we use cookies and similar functions to process end device information and personal data. The processing is used for purposes such as to integrate content, external services and elements from third parties, statistical analysis/measurement, personalized advertising and the integration of social media. This consent is voluntary, not required for the use of our website and can be revoked at any time using the icon on the bottom left.
Accept
Decline
Close
Accepted